Aluminum Solar Profile Fabrication Machine (High Speed)
Aluminum Solar Profile Fabrication Machine:
1,Full automatic,high speed
2,cutting,punching,revieting
3,automatic corner cutting machine
4, automatic testing
Two kinds of solar profile fabrication machine:
| high speed solar profile fabrication machine:18000~20000pcs/10hours |
| low speed solar profile fabrication machine:12000~13000pcs/10hours |
Aluminum solar profile fabrication machine including:
| automatic long profile fabrication machine |
| automatic short profile fabrication machine |
| automatic corner cutting machine |
Solar profile process:
| autoamtic loading |
| autoamtic Cutting |
| autoamtic punching |
| autoamtic revieting |
| autoamtic testing(testing length precision,size precision) |
Working video:
1、 Preface-solar profile
In recent years, the photovoltaic industry has developed rapidly, and photovoltaic modules, as the core components of photovoltaic power generation, have attracted increasing attention from the industry and consumers for their quality and stability. In photovoltaic modules, the frame serves as a protective shell for photovoltaic glass, and its quality is equally crucial. So, how are photovoltaic frames produced? This article will provide you with a detailed introduction.
2、 Procurement of raw materials for photovoltaic frames
1. Aluminum procurement: Currently, 6063 aluminum profiles are mainly used for production on the market. Manufacturers will purchase qualified aluminum profile materials from domestic and international markets to ensure reflectivity and hardness.
2. Procurement of plastic accessories: Plastic accessories such as pads, corner brackets, and washers are usually required to be installed inside the photovoltaic frame. Manufacturers will purchase qualified plastic accessories in the market to ensure the internal quality of photovoltaic frames.
3、 Processing of photovoltaic frame solar profile
1. Cutting: The purchased aluminum material needs to be cut on the center line of the aluminum material according to a fixed size, usually using a sawing machine and cutting equipment for cutting.
2. Stamping: Stamping aluminum into different shapes and lengths. Common photovoltaic frame shapes include U-shaped, frame shaped, Z-shaped, L-shaped, etc.
3. Bending: Bend the aluminum material through a bending device to make it tightly combined with photovoltaic glass.
4、 Surface treatment of photovoltaic frame soalr profile
1. Oxidation: Oxidation refers to the use of chemical or electrochemical methods to produce an oxide film on the surface of aluminum, increasing its rust resistance.
2. Electrophoretic coating: Electrophoretic coating is a combination of electrophoretic deposition technology and coating technology, and is a commonly used anti-corrosion coating material.
5、 Finished product inspection of photovoltaic frame
1. Appearance inspection: Appearance inspection mainly checks the surface quality of the photovoltaic frame, including whether there are unevenness, whether the oxide film is evenly formed, and whether there are burrs.
2. Dimensional inspection: Dimensional inspection is mainly used to check whether the dimensional accuracy and tolerance of the photovoltaic frame are within the qualified range.
3. Strength testing: Strength testing is used to check the wind pressure resistance, impact resistance, corrosion resistance, and durability of photovoltaic frames.
6、 Frame materials and market prospects
At present, the main frame materials used in the market are aluminum alloy and polypropylene. Among them, aluminum alloy materials are widely used in photovoltaic frames due to their excellent properties such as oxidation resistance, corrosion resistance, and UV resistance.
With the continuous expansion and maturity of the photovoltaic market, the photovoltaic frame industry also presents a good development prospect. It is expected that in the coming years, driven by policy support and market demand, the Chinese photovoltaic frame market will maintain a high growth rate
