12inch 4500 UST Long Stroke Aluminum Profile Extrusion Press Machine
12inch 4500 UST aluminum extrusion press machine:
1, reference photo extrusion press machine has been used more than 15 years
2, after 15 years working, still work well
3, long stroke design
4, working situation monitor on touch screen
Long stroke, short stroke, back loading, front loading aluminum extrusion press machine are all available in our factory, stable working, fast after sales service is our advantage.
Supply full line of aluminum extrusion line, including extrusion press machine,double puller, handling conveyor table,billet heating furnace, extrusion mold heating furnace and aging furnace
12inch 4500 UST extrusion press machine main parameters:
| main cylinder capacity | 3928Tons |
| System pressure | 230kgf/cm2 |
| standard billet size | dia.305mm*1200mm long |
| standard mold size | dia.580mm*560mm long |
| front platen mouth | dia.380*520mm(customized) |
| main cylinder diameter | dia.1380mm |
| container cylinder size | dia.220mm |
| container cylinder quantity | 4pcs |
| shear cylinder diameter | dia.250mm |
| mold slide cylinder diameter | 200mm |
Speed of long stroke 12inch extrusion press:
| extrusion time | 15mm/sec |
| dead cycle time | 28sec |
| container released | 185mm/sec |
| container sealed | 250mm/sec |
| shear down | 420mm/sec |
| shear up | 650mm/sec |
Material of 12inch extrusion press machine:
| main cylinder | 35# forged |
| main cylinder piston | chilled cast iron,hardness HB240-250 |
| four tie rod | 40Cr forged |
| front platen | 35#cast steel |
| container seal | 35# cast steel |
| container outside sleeve | 5CrMnMo |
| container inside sleeve | H13 |
| extrusion stem | H13 |
| dummy block | H13 |
| main cylinder slide seat | 35# cast steel |
Additional parts for extrusion press machine:
special hydraulic oil cooling machine, will be instead of traditional cooling tower with plate heat exchanger
